Walksnail Avatar HD Mini 1s Kit

Features

1080P/60fps 3.1V-13V

22ms low latency Power 500mW

Built-in 32G storage 6.8g light weight

Bullet Points

1080P/60FPS, 720P/120FPS

The Avatar HD system uses H.265 code, an industry-leading technology, to provide 1080p FPV image quality with ultra-low latency.

6.8g Light Weight Board

The Avatar mini 1S VTX weights only 6.8g and fits perfectly with the 75X quad.

22ms Low Latency

Supports both high frame rate and standard frame rate, in high frame rate, it has an average latency of 22ms.

32G Built-in Storage

The Avatar mini 1s VTX comes with 8G built-in storage, it can record 1080p with 60fps or 720p with 100fps/60fps HD flight videos without interference.

Specification

Camera

• Model: Avatar nano
• Image Sensor: 1/2.7”1nch
• Resolution: 1080P/60fps, 720P/120fps, 720P/60fps
• Ratio: 16/9 4/3
• Lens: 2.1mm
• FOV: 170°
• Aperture: F2.0
• Shutter: Rolling shutter
• Min. Illumination: 0.001Lux
• Weight: 3.5g
• Dimensions: 14*14*17mm
• Coaxial Cable: 55mm (default) / 90mm

VTX

• Model: Avatar mini 1s module
• Communication Frequency: 5.725-5.850GHz
• Transmitter Power (EIRP):
  • FCC: <25.5dBm
  • CE: <14dBm
  • SRRC: <20dBm
  • MIC: <25dBm
• I/O Interface: JST1.0*6 (Power in) JST0.8*4 (USB)
• Mounting Holes: 25.5*25.5mm
• Dimensions: 30*30*6.5mm
• Storage: 8G (V2) / 32G (V3)
• Recording: 1080p / 720p
• Weight: 6.8g
• Operating Temperature: -20-40℃
• Channels: 8
• Wide Power Input: 3.1V-5V (V2) / 3.1V-13V (V3)
• Supported FC System: Betaflight, Inav, Fettec, Kiss, ArduPliot
• OSD: Canvas mode
• Bitrate: 25mbps 50mbps
• Latency: Average latency 22ms
• Antenna: IPEX

VTX Antenna

• Model: Polar Antenna
• Polarization: LHCP
• Bandwidth: 5.6GHz-5.9GHz
• Average Gain: 2dBi
• Radiation Efficiency: ≥98%
• VSWR: ≤1.4
• Connector: U.FL
• Line Length: 90mm
• Dimension: H105mm*R11.2mm
• Weight: 1.5g

Packing List

• Avatar Mini 1S KIT X1
• 4 Pin USB Cable X1
• 6 Pin Power Cable X1
• M2x3/4mm Screws X2
• M2x16mm Screws X4
• M2 Screw nut X4
• 2.1x3.4x1mm Gasket X5