The Lumenier LUX HD AIO G4 Flight Controller + ESC is a powerful AIO ready to power the DJI O3 in a simple configuration. It also works great on standard analog systems with the onboard analog OSD chip. The LUX HD AIO G4 builds on all the best features of its predecessors and further improves on hardware components and layout, and is now dedicated to a design for the DJI systems. This AIO uses a G4 processor along with top-of-the-line hardware from the 35A AM32 3-6S ESC powered by four F4 processors! Unleash the capabilities of your FPV Racing Quadcopter with the Lumenier LUX HD AIO G4 Flight Controller! This LUX HD AIO G4 comes in a standard 25x25mm form factor weighing only 10.3g.
Features
- Low resistance Mosfet with Metal case, up to 6s 35A supported
- Analog current sensor3~6S Lipo (12.6~25.2V) Input
- 16M Flash Memory Blackbox
- 25x25mm Mounting Pattern
- OSD (Analog / Digital)
- G473 Flight Controller
- 35A AM32 ESC
- ICM42688 Gyro
- DJI Ready
Specifications
- MCU: STM32G473 / 170Mhz / 512KB Flash
- BEC: 2x BEC, 5V and 10V, 2.5A each
- VBAT Input: 8-32V, 3-6S Lipo
- Blackbox: 16MB (128M Bit)
- MOSFET: Low resistance
- ESC MCU: F4 BLHeli_32
- Amperage: 35A up to 6S
- Current sensor: Analog
- Dimensions: 36x36mm
- DJI Digital Port: Yes
- Gyro: ICM42688
- LED: WS2812b
- FC MCU: G473
- PMW Output: 4
- Weight: 10.3g
- Beepers: Yes
- OSD: Yes
- 12C: 1
Links / Downloads
- Lumenier LUX HD AIO - G4 Manual
- Download the LUX HD AIO-G4 .hex file for Betaflight 4.5.0 (comes pre-installed on the board)
Includes
- 1x Lumenier LUX HD AIO - G4 FC + 35A AM32 3-6S ESC
- 4x M2x12mm Socket Cap Screws
- 4x M2x8mm Non Threaded Spacers
- 4x M2x4mm Threaded Spacers
- 1x DJI Plug-N-Play Cable
- 1x 5-Pin Micro JST Cable
- 1x 220uF 25V Capacitor
- 1x XT30 LiPo Pigtail
- 1x 4-Pin Micro JST
- 4x M2 Nuts
- Prozessor: F4
- Gyro: ICM42688
- Size: 26x26 Whoop