Matek H743-SLIM V3 WING Flight Controller

The Matek H743-SLIM V3 WING Flight Controller is a compact and high-performance flight controller designed for drone enthusiasts seeking reliable and powerful hardware. Equipped with a robust STM32H743VIH6 MCU running at 480MHz, this flight controller provides the stability and precision required for both hobbyist and professional applications. Its slim design makes it ideal for builds where space and weight are critical.

FC Specifications

• MCU: STM32H743VIH6, 480MHz, 1MB RAM, 2MB Flash
• Board V1.0 IMU: MPU6000 (SPI1) & ICM20602 (SPI4)
• Board V1.5 IMU: MPU6000 (SPI1) & ICM42605 (SPI4)
• Barometer: Infineon DPS310 (I2C2)
• OSD: AT7456E (SPI2)
• Blackbox: MicroSD card socket (SDIO)
• 7x Uarts (1,2,3,4,6,7,8) with built-in inversion
• 13x PWM outputs (including "LED" pad)
• 2x I2C ports
• 1x CAN bus
• 6x ADC inputs (VBAT, Current, RSSI, Analog AirSpeed, Vbat2, Cur2)
• 3x LEDs for FC Status (Blue, Red) and 3.3V indicator (Red)
• USB Type-C (USB2.0)
• 1x JST-SH1.0_8pin connector (Vbat/G/Curr/Rx8/S1/S2/S3/S4)
• 1x JST-GH1.25_4pin connector (5V/CAN-H/CAN-L/G)
• Dual Camera Inputs switch
• 5V/Vbat filtered power ON/OFF switch
• DJI FPV OSD is supported via any spare UART

Power Specifications

• Vbat Input: 6~36V (2~8S LiPo)
• BEC: 5V 2A continuous, max 3A
• LDO 3.3V: Max. 200mA
• No built-in current sensor
• ADC Vbat2 pad supports up to 69V (voltage divider: 1K:20K)
• Static power: 200mA@5V with BetaFlight, 150mA@5V with ArduPilot

FC Firmware Compatibility

• ArduPilot (ChiBiOS): MATEKH743
• BetaFlight: MATEKH743
• INAV: MATEKH743

Physical Specifications

• Mounting: 30.5 x 30.5mm, Φ4mm with grommets Φ3mm
• Dimensions: 36 x 36 x 5 mm
• Weight: 7g

Included in the Package

• 1x H743-SLIM V3 WING Flight Controller
• 6x Silicone grommets M4 to M3
• 1x JST-SH1.0_8pin cable (5cm)
• 2x JST-SH1.0_8pin connectors
• 1x JST-GH-4P to JST-GH-4P cable for CAN port (20cm)