TBS PowerCube V2 2in1 FPVision

Artikelnummer: 11470

169,90 €

inkl. 19% USt., versandfreie Lieferung

sofort verfügbar (1 - 3 Werktage)

Stacked compact, a all-in-one power package for your fpv racer between 120 and 330 size. 2-5S capable, 25A continuous, 45A burst ESCs provide ample juice. The Colibri RACE is a F3 based flight controller with enough processing power and memory to achieve low looptimes. The ESCs are TBS designs based on our BULLETPROOF technology, running the most recent BLHeli-S firmware.

The TBS POWERCUBE combines knowledge and experience over 3 years of research and racing use. It is the new standard for performance, reliability, ease-of use and cost in race machines. Main highlights include

All-in-one, solder-free system for race quads. Comes with - or plugs into - everything you need.
Optimized for centralized weight distribution
Colibri V2.0, STM32F3-based FC, with the best IMU MPU6000 (SPI, 8KHz)
Bulletproof 2in1 25A 5S DSHOT600 BlHeli-S, BlHeli-S V16.x (FH-00), most reliable ESC in the industry
PDB V2.0, providing now double power with 4A on 5V and 250mA on 12V.
Patented power distribution
Clean, filtered power for fpv camera and video transmitter, selectable between 5V/12V and VBatt.
Compatible with FPVision and Core PNP PRO OSD
MPU6000 new generation accelerometer/gyro
STM32F303 based chipset for ultimate performance
PPM, SBUS, DSM, DSMX input (5V and 3.3V provided over internal BUS)
6 PWM ESC output channels (autoconnect, internal BUS)
Choose between plug & play sockets or solder pads for R/C and buzzer
RGB LED strip support incl. power management
Extension port for GPS / external compass / pressure sensor
UART port for peripherals (Blackbox, FrSky telemetry etc.)
5V buzzer output
SiLabs EFM8BB2 50MHz with PWM gate drivers
BLHeli-S (FH-00) latest generation firmware pre-flashed
2-5S capable
25A continuous power with active burn protection
DSHOT600, 32kHz (MultiShot) capable, OneShot capable, PWM capable
Fastest throttle response, braking
Lowest minimum RPM
Full water and dust protection
On Screen Display PNP PRO V2
Unify PRO with 25mW to 800mW
Video Switch for 2 Cameras
DCDC Step down with 4A on 5V
DCDC Step up with 250mA
100A Digital Current Sensor
Control OSD via your Remote sticks
Set VTX Frequency, Power etc.
Control your Camera Menu with the integrated camera control feature!
PID tuning through OSD
Integrated TBS FPVision module - integrates the TBS CORE PRO and TBS Unify Pro technologies. The Core PRO takes control of everything. You can fully configure your flight control with your remote control, tune your multi rotor without the need for a laptop. And during the flight, you're beeing kept up to date with everything that's going on in- and around your multi rotor.

New features such as artificial horizon, accurate current and voltage sensing, battery and R/C link health (RSSI) and navigational help (GPS required, sold separately) are all part of the bundle. Nobody has flown the FPVision and not been blown away by its functionality and integration. Give it a try, you won't be disappointed!

STM32 F3, MPU6000 SPI Flight controller running Betaflight
Regulated and filtered power for Cam and VTx (5V/12V/VBatt switchable)
25A continuous, 45A peak ESC (each)
2-5S capable
Power distribution: 120A continuous
Current Sensor: 100A sense, 250A peak throughput
Dimensions: 36mm x 36mm x 22mm
Weight: 56g incl. PDB, wires & connectors
TBS POWERCUBE stack with Flight Control, 2x 2in1 ESCs, FPVision
Terminating plastic shoe to isolate the TBS PowerCube carbon fiber frames
Cables for FPV Camera and video transmitter
External 5V Buzzer
LED pigtail cable

TBS Agent for software updates
BLHeli-Suite for ESC updates


 0  Bewertungen

Geben Sie die erste Bewertung für diesen Artikel ab und helfen Sie Anderen bei der Kaufenscheidung:

Einträge gesamt: 1
5 von 5
Ausgezeichnete AIO Lösung

Ich bin mit dem PowerCube hochzufrieden. Die ESCs sind perfekt kallibriert, der FC bietet genügend Leistung und der Einbau ist kinderleicht. Ebenso bin ich von der Leistung des VTx und dem perfekten Zusammenspiel von FC und OSD begeistert. Alle versprochenen Features sind meiner Meinung nach einwandfrei umgesetzt. Um den Stack auseinander zu bauen empfehle ich die TBS Sexy Screwdriver direkt mitzukaufen. Mein eigenes Werkzeug war bei weitem nicht filigran genug dafür!