SpeedyBee F7 Mini Flight Controller BLE

Item number: 55530

53,95 €

including 19% VAT., plus shipping

Choose tax zone / country of delivery

Available now! (Shipping time: 1 - 3 workdays)
Order within the next 16 hours and 51 minutes and we will ship your order tomorrow.
Description

SpeedyBee F7 Mini 35A Stack BLHeli_S 48k/96k
 
Wireless full-featured flight controller tuning
 
Wireless full-featured BLHeli_S ESC tuning
 
High-performance F7 flight controller CPU
 
Real 35A BLHeli_S DSHOT600 ESC
 
Built-in Bluetooth 4.0 BLE chip


SpeedyBee F7 MINI
Change motor directions wirelessly!
With this stack, when you finish your build, connect to the
SpeedyBee app, change the motor directions just in
a few simple steps. Then take off.
SpeedyBee F7 MINI
Flash Blue Jay firmware for bthe ESC wirelessly!
You are a big fan of Blue Jay ESC firmware, because it supports
48k/96k PWM frequency and Bidirectional Dshot? No problem,
the ESC of this stack is loaded with latest Blue Jay firmware.

SpeedyBee F7 Mini FC Specs
MCU STM32F722
IMU(Gyro) MPU6000
USB Port Type Type-C
Barometer N/A
OSD Chip AT7456E chip
BLE Bluetooth Supported. Used for Flight Controller configuration
Flash FC Firmware Wirelessly Not supported. (Please update firmware for this FC on the PC)
Download/Analyze Blackbox Not supported. (Please download and analyze Blackbox data on the PC)
DJI Air Unit Soldering Pads Supported
Flash(for BlackBox) 8MB
Current Sensor Supported, Scale=250 Offset=-500
BetaFlight Camera Control Pad Yes(CC pad)
Power Input 3S - 6S Lipo
5V Output 6 groups of 5V output, five +5V pads and 1 BZ+ pad( used for Buzzer). The total current load is 2.5A.
9V Output 2 groups of 9V output, the total current load is 2A.
3.3V Output Supported. Up to 500mA current load.
ESC Signal Pads M1 - M4
UART Full UART * 3(UART1, UART2, UART3)
ESC Telemetry UART R4(UART4)
I2C Not supported
LED Pad Used for WS2812 LED
Buzzer BZ+ and BZ- pad used for 5V Buzzer
BOOT Button Used to enter DFU mode
RSSI Input Not supported
SmartPort Use any TX pad of UART for the SmartPort feature.
Supported Flight Controller Firmware BetaFlight(Default), EMUFlight, INAV
Firmware Target Name SPEEDYBEEF7MINI
Mounting 20 x 20mm,  3.5mm hole diameter
Dimension 30 x 30 x 7.5mm
Weight 5.7g

SpeedyBee 35A BLHeli_S Mini 4-in-1 ESC Specs
Firmware BLHeli_S JH40
Continuous Current 35A * 4
Burst Current 45A(5S)
ESC Protocol DSHOT300/600
Power Input 3-6S LiPo
Power Output VBAT
Current Sensor Support (Scale=250 Offset=-500)
Mounting 20 x 20mm, 3.6mm hole diameter
Dimension 35 * 35 * 5.5mm
Weight 7g

Characteristics
Size:
Prozessor:
Gyro:
Ratings

 0  Ratings

Write your first review and help others with their purchase decision:

Customers have also viewed