Matek GNSS & Kompass M9N-5883

Artikelnummer: 54130

52,90 €

inkl. 19% USt., zzgl. Versand

Auswahl Steuerzone / Lieferland

momentan nicht verfügbar
Beschreibung

M9N-5883 uses multi-constellation GNSS powered by u-blox NEO-M9N , NEO-M9N is a concurrent GNSS receiver which can receive and track multiple GNSS systems. Owing to the multi-band RF front-end architecture all four major GNSS constellations, GPS,Galileo, GLONASS and BeiDou can be received concurrently.
More details about the NEO-M9N, pls check out u-blox NEO-M9N page


Specifications
GNSS u-blox NEO-M9N (GPS, GLONASS, Galileo and BeiDou)
Magnetic Compass QMC5883L
Patch antenna 25*25*4mm
Input voltage range: 4~5.5V (5V pad/pin)
Power consumption: 50mA
UART baudrate: 38400 default
Operating Temperatures: -20~80 °C
UART(TX, RX) interface for GNSS NEO-M9N
I2C(DA, CL) interface for Compass QMC5883L
JST-GH-6P connector
3.3V Power LED, Red
GNSS PPS LED, Green,  blinking(1Hz) when GNSS has 3D fixed
32mm*32mm*10mm
14.5g


Includes
1x M9N-5883
1x JST-GH-6P to JST-GH-6P 20cm silicon wire


Wiring and settings
M9N-5883 5V to Flight controller 4~5.5V
M9N-5883 RX to Flight controller UART_TX
M9N-5883 TX to Flight controller UART_RX
M9N-5883 CL to Flight controller I2C_SCL
M9N-5883 DA to Flight controller I2C_SDA
M9N-5883  G  to Flight controller GND


Compass Alignment(Arrow forward and flat mounting): Tilting the magnetometer is strongly discouraged !
INAV/BetaFLight: CW 270° Flip when flight controller arrow is facing forward also.
Ardupilot/Mission Planner: Rotation None.
Protocol: Ublox or NMEA
Make sure to have compass/magnetometer 10cm away from power lines/ESC/motors/iron based material
The scratches on ceramic antenna are the result of tuning the antenna.
u-center Windows

Bewertungen

 0  Bewertungen

Geben Sie die erste Bewertung für diesen Artikel ab und helfen Sie Anderen bei der Kaufenscheidung:

Benachrichtigen, wenn verfügbar