MAMBA F722 Mini F7 MK3 F40 BL32 20x20 Stack

Item number: 19880

EAN: JH60270

84,90 €

including 19% VAT., plus shipping

Available now! (Shipping time: 1 - 3 workdays)
Order within the next 2 hours and 35 minutes and we will ship your order today.
Description

MAMBA | Super Big Soldering Pad

Fixed

Add I2C function
When you connect the USB, the receiver and OSD settings can be saved
Increase the pad area
LED signal selection (when Mamba Led sys avaiable)
BEC short circuit protection
TVS instant high voltage protection 30V
Update

F405 models support F.prot(Most)
Upgrade the anti-interference cable
Use Typec(Most)
The pad area of Mini flight controller (20×20) increased by 140%
Added

Add self-recovery insurance to the receiver's 5V power supply
Increase the camera VCC power supply pad
Standard flight controller (30.5×30.5) adds spare pad
Gyro uses an independent Low Dropout Regulator (Low Dropout Regulator) and reduces ripple interference
FC Specifications
MAMBA Basic F722MINI MK3
MCU: 216MHz STM32F722RET6
GYRO: MPU6000
Barometer: Yes
OSD: Yes
Blackbox: 16M Flash Memory
Uarts: 6 Set
ESC Soft: Dshot300/600
ESC Telemetry: Yes
Power Led: Yes
LED Controller: BF LED
S/F.Port: Yes
RSSI: Yes
Buzz: Yes
Input: 2~6S Lipo (8.4~25.2V)
TVS Protection: Yes
BEC:3.3V 0.5A& 5V 2.5A
MOUNTING: 20mm, M2

ESC Specifications
MAMBA F40 MINI PRO
INPUT VOLTAGE: 2~6S Lipo (8.4V~25.2V)
CONTINUE CURRENT: 40A×4
BURST CURRENT: 45A (10S)
BEC: No
Target:MAMBA F40MINIPRO
SOFT: Dshot300/600/1200
TVS Protection: Yes
MOUNTING: 20mm, M3/M2

Supply :
High-Frequency 470uF/35V ×1
8pin sh1.0 ×2
16AWG 60mm ×2
AMASS Original XT60

Characteristics
ECS:
Firmware:
Size:
Prozessor:
F7
Ratings

 5  Ratings

Share your experience with other customers: