MAMBA F722 MK3 60A 6S 32Bit F7 Stack

Item number: 86620

EAN: JH60373

102,95 €

including 19% VAT., no shipping costs

Not available now!
Description

MAMBA Stack F722 MK3 60A 6S 32bit (NO WIFI)

Fixed
Add I2C function
When you connect the USB, the receiver and OSD settings can be saved
Increase the pad area
LED signal selection (when Mamba Led sys avaiable)
BEC short circuit protection
TVS instant high voltage protection 30V


Update
Upgrade the anti-interference cable
Use Typec(Most)
The pad area of the Mini flight controller (20×20) increased by 140%
Added

Add self-recovery insurance to the receiver's 5V power supply.
Increase the camera VCC power supply pad.
The standard flight controller (30.5×30.5) adds a spare pad.
Gyro uses an independent Low Dropout Regulator (Low Dropout Regulator) and reduces ripple interference.


FC Specifications
MAMBA Basic F722MK3
MCU: 216MHz STM32F722RET6
GYRO: MPU6000
Barometer: Yes
OSD: Yes
Blackbox: 16M Flash Memory
Uarts: 6Set
ESC Soft: Dshot300/600
ESC Telemetry: Yes
Power Led: Yes
LED Controller: BF LED/MB LED(4 Set 2812 LED)
S/F.Port: Yes
RSSI: Yes
Buzz: Yes
Input: 3~6S Lipo (12.6~25.2V)
TVS Protection: Yes
BEC:3.3V 0.5A& 5V 3A (System Power)&
5V 3A(LED)& 9V 3A
MOUNTING: 30.5mm, M3

ESC Specifications
MAMBA F60_BL32
INPUT VOLTAGE: 3~6S Lipo (12.6V~25.2V)
CONTINUE CURRENT:60A×4
BURST CURRENT:75A (10S)
BEC: No
Target:BLHeli_32 MAMBA F60_BL32
SOFT: Dshot300/600/1200
TVS Protection: Yes
MOUNTING: 30.5mm/M3

Supply :
High-Frequency 470uF/35V ×1
8pin sh1.0 ×2
12AWG 100mm ×2
AMASS Original XT60

Characteristics
ECS:
Firmware:
Size:
Prozessor:
F7
Ratings

 1  Rating

Share your experience with other customers:

Notify me when this product is available