Lumenier F7 Mini Stack /with out VTX
The Lumenier F7 Mini Stack is the go-to 20x20 stack for all types of mini quads. The powerful F7 flight controller allows for simultaneous processes to be handled with ease, giving you a stable and clean signal to your sensors.
The 2-6S Mini Razor Pro 45A ESC features the latest gen. BLHeli_32 firmware running alongside an additional F3 processor to give you even more headroom. The Mini Razor Pro's innovative modular power system gives the user the option to install one of three different modules that give the 4-in-1 ESC additional functionality related to power management. Choose either the power filter module, extra capacitance module, or voltage regulator module to make your Mini Razor Pro fit to your specific needs (modules sold separately).
LUX Mini F7
MCU: 216MHz STM32F722RET6
Blackbox: 128Mbit / 16MByte
Anti-Vibration silicone grommets built-in
6x UARTs with built-in inversion
1x Softserial supported
1x SH1.0_8pin connector (Vbat/G/Curr/TLM/S1/S2/S3/S4)
Vbat filtered output power for VTX
Smartaudio & Tramp VTX protocol support
WS2812 Led Strip support
Beeper solder pad
Input: 6~36V (2~8S LiPo)
BEC: 5V 3A cont.
LDO 3.3V: Max.200mA
Betaflight support - target LUXMINIF7
BLHeli passthrough flashing supported by hardware
High quality, gold plated PCB
Micro USB connector for programming
Dimensions: 28x28x6mm (includes USB in height)
Mounting Holes: 20mm square to center of holes
Mini Razor Pro 45A
New F3 MCU running at 108MHz, (older ESCs use F0 at 48MHz)
Latest Gen. firmware using BLHeli_32 (Razor_32 target)
Supports DSHOT 1200, Proshot, Oneshot125 (125-250us), Oneshot42(41.7-83.3us) and Multishot (5-25us). Auto-detection.
Modular Power System for even further customization (modules sold separately)
Oversized motor pads for easy installation and maintenance
Adaptive timing, compatible with a wide range of motors and Kv
Synchronous rectification technology adds efficiency, damped light
Powerful regenerative braking / active braking.
2-6s LiPo battery compatible
Customize your Mini Razor Pro even further with optional power modules..
Input: 2-6s LiPoly
Constant: 45 Amps
Burst: 60 Amps
Mounting holes: 20x20 M3
Signal wire: 7cm
8pin connector pinout: VBAT, Ground, Current ADC, TLM, Motor 1, Motor 2, Motor 3, Motor 4
LUX Mini VTX
The Lux Mini VTX comes with a whip antenna, but if you are looking for the best performance, upgrade to an AXII antenna listed in this bundle.