FlightOne SKITZO RevoltOSD Flight Controller

Artikelnummer: 14660

43,52 €

inkl. 16% USt., zzgl. Versand

momentan nicht verfügbar

Building on the success of the Revolt, RaceFlight have created the next iteration in flight controllers. Designed to add all the features customers have been asking for, as well as some new ideas. Builds now take 1/10th the time, due to the easy connector system. However, you still have the ability to direct solder, if you prefer. Flight controller now accepts full LiPo voltage, with up to a 6s rating, with plenty of filtering to give you the highest performance. Wiring kits will be available for all the most popular devices, so there is no need to solder anything, just plug and play. There will be extra pre-pined kits that allow you to customize for main different situations. We have even included an OSD and camera control on the latest Flight Controller.

The RaceFlight RevoltOSD flight controller is one of the most advanced, performance-driven, flight controllers ever designed. The RevoltOSD uses a powerful F405 MPU, accompanied by the High-Speed Invensense 20602 gyro, allowing it to take full advantage of RaceFlight One's efficient code to run at 32KHz for the best Performance possible.

The SKITZO special edition comes in black for a sleek look.

Pairs perfectly with the RaceFlight SKITZO Bolt32.

The RevoltOSD presents not only the BEST performance but also the most STABLE performance due to the amazing vibration rejection technology implemented in RaceFlight. Our filters along with the integrated RaceFlight Gummies, allow your quad to stay in the air no matter what! Damaged propellers caused by that insane gate clip on turn 3? Not a problem. You can still finish the race! Endless days of tuning are now a thing of the past. Our boards come preloaded with software and defaults that should fly amazingly for 99% of people.

In addition to the vibration rejection technology, the SSG (Invensense 20602) gives you the highest speeds currently possible with the lowest noise floor and highest sensitivity. The Invensense 20602 gyro has never been used in any flight controller before (except the Revolt) and gives you the fastest response time possible as if the quad can read your mind.

Setup Simplicity
Setting up the RevoltOSD is easy. The solder pin layout is easy to read with motor connections in each corner. Just solder the closest motors and the wizard handles the rest, you can put the Revolt in upside down and backward just solder to the closest motor pad and the RF1 wizards will handle the rest. The RevoltOSD also features DFU free updating and a self-healing and updating bootloader, just in case something does go wrong.

Zadig and other complicated driver configuration tools are a thing of the past with the RevoltOSD’s new driverless installation technology. Tired of messing around with Zadig or DFU to update your software? We were too, that’s why you no longer have to worry about messing around with them. The RevoltOSD also features DFU free updating and a self-healing and updating bootloader, just in case something does go wrong.

Fast building using connector system
Full Lipo up to 6s rating
Advanced filtering
Plug and Play
Built-in internal OSD
LED Driver for WS2812b programmable LED
SBUS Inversion
High-Speed 32khz gyro, lowest noise floor, and highest sensitivity gyro ever used
Through-hole solder pads – forms an I-Beam when soldered for extra strength
FrSky Taranis, Spektrum, Futaba, JR, IBus, Sbus and other radio support
Integrated buzzer driver
Voltage and current ADC pins, for full voltage and current monitoring
Full telemetry output support
ESC flashing and configuration built into the configurator
Most active software development
Selectable 3.3 voltage
3 serial UARTs
Bluetooth expandable
F4 processor
16mb of flash memory
GPS expandable
Pins into RaceFlight Bolt 4in1 ESC
Dimensions: 36mm x 36mm
Mounting holes: 30.5mm squared to center of holes
Weight: 6 grams
Easily connectable to the RaceFlight Bolt with our special connector.

1x RaceFlight SKITZO RevoltOSD


 6  Bewertungen

4 Sterne
3 Sterne
2 Sterne
1 Stern

Teilen Sie anderen Kunden Ihre Erfahrungen mit:

Einträge gesamt: 6
5 von 5
Wer nicht gerne lötet... ;-)

Der FlightOne Skitzo Flight Controller ist gut geeignet für Leute, die nicht gerne löten. Hier sind statt Lötpads einige Buchsen verbaut um alle nötigen Komponenten via Stecker mit Strom zu versorgen. Praktisch für einen schnellen Austausch. Dazu mit F4 Prozessor und 3 UART Plätzen absolut ausreichend. Nutze den FC in Kombination mit dem RaceFlight Bolt 4in1 ESC. Nix zu meckern.

5 von 5
Heinz Linnartz

Auf jeden Fall erstmal ein herzlichen Dank für das top Produkt es ist einfach bombastisch ich liebe diese Marke einfach nur top Qualität in einfachen Worten einfach nur der Hammer der Controller und genau das was er machen soll ein wunderschönes kann diesen Controller nur jeden ans Herzen legen probierten aus und wieder mal Dank an das gesamte Team

5 von 5
Flightone Revolt OSD Skitzo Flight Controller

Der Flightone Revolt OSD ist eine sinnvolle Weiterentwicklung zur normalen Revolt f4. Alles ist über Stecker und ohne Lötarbeiten ansteckbar und seit FalcoX released wurde, fliegt sich das Teil einfach extrem gut! Sollte man mal probiert haben.

5 von 5
FlightOne SKITZO RevoltOSD Flight 

Der FlightOne SKITZO RevoltOSD Flight ist ein guter flightcontroller. Er làdt sich sehr schön in der luft fliegen. Und man kann alles einstecken.

5 von 5
Nie wieder Betaflight

Leicht einzurichten mit oder ohne Löten, Flugeigenschaften nicht zu vergleichen mit Betaflight, Cleanflight etc. Hier gibt es ein extra Chip, der sich nur um den Gyro kümmert und den technischen Fortschritt merkt man.

5 von 5
Hochwertiger FC

Wie erwartet ein robuster und hochwertiger FC. Einfach und schnell ein zubauen. Farbe leider nicht mein geschmack.

Benachrichtigen, wenn verfügbar