BetaFPV Toothpick F722 2-6S AIO BLHeli_32 35A

Artikelnummer: 63200

EAN: 705644072764

79,50 €

inkl. 16% USt., zzgl. Versand

sofort verfügbar (Lieferzeit: 1 - 2 Werktage)
Beschreibung

SAVE $10.00 USD
F722 2-6S AIO 35A FC is a very reliable FC that is made to meet your advanced FPV needs. Comes with an F722 chip and BLHELI_32 ESC firmware, this board provides a better performance capability and higher calculation speed, which brings pilots a more stable and smoother flight. What's more, F722 AIO 35A FC has specially added a 6-pin connector for DJI Digital VTX, just plug & play, less solder work needed, super easy to install. It also can handle up to 6S of input voltage and push your FPV racer to the max. We highly recommend it for 4-5'' Toothpick quad, such as X-Knight 5'' Toothpick Quad.

Compared with F4 AIO 35A FC, F722 FC's firmware is upgraded from F411 to F722, providing a better performance capability and higher calculation speed, which brings pilots a more stable and smoother flight.
F722 AIO 35A FC has specially added 6-pin connector for DJI Digital VTX, just plug & play, less solder work needed, perfect for the pilots who enjoy the DJI Digital VTX system.
6 full UARTs are available on this board. With plenty of UARTS, Pilots could have more options for external parts like VTX, GPS, Receiver and other components.
Come with a built-in 10V BEC circuit, this board can offer the external components a more stable voltage and current, which brings pilots a better flight experience.
It can handle 35A continuous current(40A burst), totally supports the 2-6S lipo battery, brings the drone a stronger flight performance.
With the 6S battery and this F722 35A AIO toothpick FC, the drone will break through the limit of the power of toothpick drone, exploring more possibilities in 4-5'' drones.


Specification of FC
Item: F722 35A AIO FC(BLHeli_32)
Weight: 7.89g
CPU: STM32F722RET6
Six-Axis: MPU6000 (SPI connection)
Mounting hole size: 26mm * 26mm
Firmware version: betaflight_4.2.x_BETAFPVF722
OSD: Built-in BetaFlight OSD (OSD chip: AT7456E)
Support programmable LED like WS2812 etc
Built-in current sensor


Specification of ESC
Signal support: PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600
Receiver: Support Frsky XM/XM+ Receiver/ Futaba Receiver/Flysky Receiver/DSMX Receiver/TBS Crossfire Receiver (requires external connection)
Input voltage: 2S-6S Lipo
Continuous current: 35A
Peak current: 40A
ESC firmware: BLHELI_S 32
Indicators: 2 indicators: receiver indicator (green)/Flight control power indicator (red)
Capacitance: CS|5*10*13mm|470μF|35V
Connecter: 80mm 14AWG silicone cable with XT60
Recommended motors: 14XX series, 15XX series, 16XX series, 18XX series, 20XX series


Status LED
There are 2 LEDs on the bottom of the board to indicate the status, including the Receiver LED ( Green) and FC Power LED ( Red ).

LED  Status  Description
Mode LED (Green)  Solid Horizon Mode/ Angle Mode
Mode LED (Green)  Extinguished Acro Mode
Power LED (Red)  Solid  Power on


Recommended Parts
BNF: highly recommend for TWIG ET5 and X-Knight 5'' Toothpick Quad
Battery: 550mAh 6S 75C battery, 450mAh 4S battery, 4S 1000mAh Battery
VTX: M02 25-350mW 5.8G VTX, A02 25-800mW 5.8G VTX
Motor: 1805 1550KV brushless motor, 2004 Brushless Motors, 1606 Brushless Motor, 1506 Brushless Motor
Compatible Propellers: Gemfan 5125 3-Blade props and Gemfan 5020 props
Frame: 4-5 inch Frame, highly recommend for TWIG ET5 5'' Toothpick Frame, X-Knight Carbon Fiber 5'' V2 Frame Kit and X-knight 5'' Frame


Package
1 * Toothpick F722 35A AIO 2-6S brushless flight controller
1 * Cable Pigtail (XT60U)
1 * Capacitance
1 * 6-Pin Connector for DJI Digital VTX
4 * M2x10mm Screws
8 * M2 Nuts

Merkmale
Firmware:
Größe:
Bewertungen

 3  Bewertungen

4 Sterne
3 Sterne
2 Sterne
1 Stern

Teilen Sie anderen Kunden Ihre Erfahrungen mit:

Einträge gesamt: 3
5 von 5
Hat halt seinen Preis

Also, hatte sowohl dieses BetaFPV Board als auch das 20A in Nutzung. Ich bin mit beiden soweit zufrieden. Machen halt alles was man so von nem AIO Board erwartet und fühlen sich beide wertig an. Ich hatte generell das Gefühl, dass ich mit dem 35A Board ein bisschen aggressiver geflogen bin einfach, weil ich dem Board aufgrund des 35A Ratings mehr zutraute als dem 20A. Wobei man sagne muss, dass 20Ax4=80A und wenn man bspw. den Tattu 3S 650mAh 95C Akku fliegt kann man max ca. 60A ziehen, also sollten beide Boards das ohne Probleme handeln können.
Problem an AIO Board ist halt wenn ein Teil kaputt ist kann man das Ganze tauschen.

.
31.08.2020
5 von 5
Top

Ich hab das Board mal auf einen Toothpick geschnallt, der auch ein bisschen mehr Power hat. Läuft kann ich nur sagen. Schönes Layout. Große Lötpads. So find ich das schön und ich kann genug UARTs anschließen.

.
05.09.2020
5 von 5
Top AIO Board

Der F4 AIO 35A von BetaFPV ist ein guter AIO Flight Controller der mit 35 Ampere für fast jedes Setup ausreichend ist. Ich habe kaum noch einen Stack verbaut.

.
05.09.2020