BetaFPV 75 Pro 2 F4 2S AIO Flight Controller

Item number: 18490

39,95 €

including 19% VAT., plus shipping

Short supply (1 - 3 workdays)
Description
F4 2S AIO FC (No RX) is available now. This AIO F4 FC is suitable for a lighter 2S whoop drone, like Beta65 Pro 2 or Beta75 Pro 2etc. It integrated a Betaflight F411 processor FC, Betaflight OSD, SPI Frsky receiver and 1-2S 5A ESC. So the 2S drone could save many weight for a faster fly experience. SPECIFICATIONS OF FC CPU: STM32F411CEU6 (100MHZ ) Six-Axis: MPU-6000 triaxial accelerometer / triaxial gyroscope (SPI connection) Size: 26mm x 26mm, fully compatible with the all whoop drone mounting pattern, recommend the Beta65X frame and Beta75 Pro frame. Firmware version: betaflight_matekf411rx_4.0.0 (Development Version) OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode) Built in SPI Frsky D16 protocol native receiver, compatible with almost ALL Frsky FCC radios(e.g. Taranis X9D/X9D Plus/X7) or Frsky compatible transmitter module. Not compatible with Frsky LBT protocol. Power Cable: 55mm, with 2pcs JST-PH 2.0 connector, AKA PowerWhoop connector Weight: 4.5g SPECIFICATIONS OF ESC Built-in ESC with 5A continuous and peak 6A current Power supply: 1-2S Support BLHeliSuite programmable Factory firmware: S_H_50_REV16_7.HEX Signal Support: D-shot150, D-shot300, D-shot600, Oneshot125, Multishot, PWM Status LED There are 3 LEDs on the bottom of the board to indicate the status, including Receiver LED ( Green), FC Status LED ( Red ) and FC Power LED ( Blue ). RECOMMENDED PARTS LIST Frame: Beta65X frame / Beta75 Pro 2 frame Props: 31mm 4-Blades props (for Beta65 X frame) / 40mm 4-blades props (for Beta75 Pro 2 frame) Motors: 0802 motors Battery: 2pcs 300mAh 1S batteries PACKAGE 1 * F4 2S brushless flight controller 4 * M1.2x4mm screws 4 * M1.4x5mm screws 4 * Anti-vibration ruber dampers
Ratings

 0  Ratings

Write your first review and help others with their purchase decision: