BetaFPV 75 Pro 2 Brushless Whoop OSD FrSky

Item number: 17200

118,95 €

including 19% VAT., no shipping costs

Available now! (1 - 3 workdays)
Description

Beta75 Pro 2 is a lighter but still fast enough 2S whoop drone. With the AIO F4 2S flight controller and 08028 brushless motors, only 28g without batteries. BETAFPV always try to provide more choices for every FPV pilots. Pro series is our product line with lighter, faster and higher intergrated brushless drones.

X series, like Beta65X or Beta75X, represent the highest performance of 2S whoop drones. With long range rx, powerful ESC and motors, pilots would fly the X drone like a smaller mini drones; Pro series, like Beta65 Pro 2 and Beta75 Pro 2, have a higher integrated AIO FC and lighter weight, pilots fly it like a faster Tiny Whoop drone.This is the biggest difference of the X series and Pro series drones. You could have a noticeable different experience in control.

The specification comparison of the 75mm brushless drones, Beta75X VS Beta75 Pro 2.

The smaller brother Beta65 Pro 2 is available too. Get a Beta65 Pro 2 here.

BULLET POINT
Beta75 Pro 2 start another new era of 2S whoop drones. Compared with the Beta75X, it is 14g lighter in weight, you could fly real acro in 2S battery, like a faster Tiny Whoop drone, but is still small enough, safe enough, and quiet enough to fly anywhere.
With the high performance STM32F411 processor FC boards and betaflight_matekf411rx_4.0.0 (Development Version), everyone could fly the Beta75 Pro 2 drone like a racing pro.
Durable and light enough frame is customized for the Beta75 Pro 2. It is 2g lighter than the Beta75X frame, but have a same battery slot that compatiable with the 2S.
Whole drone no soldering or tinkering necessary. Customized lightest 08028 12000KV motors with cable connectors. Just plug and play.
2pcs 300mAh HV 1S high rate batteries are recommend by default. But pilot could also use their 2S battery with a replaced power cable. Optional and affordable.
Wash-out issue totally not exists in Beta75 Pro 2 drones.


SPECIFICATION
Weight: 28g (without battery)
Motors: 08028 12000KV with connector
Frame: Beta75 Pro 2 Frame
Props: Gemfan 40mm 4-blades props, 1.0mm shaft hole
Camera: AIO Camera 35 degree (by default)
Receiver Option: SPI Frsky
Battery: 300mah 1S HV Batteries 2pcs

FC & ESC SPECIFICATIONS

Find more details about this 2S AIO F4 FC board.

CPU: STM32F411
Six-Axis: MPU6000
Size: 26mm x 26mm, whoop mounting pattern
Firmware version: betaflight_matekf411rx_4.0.0 (Development Version)
OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
Smart Audio port is available for radio control VTX
Built-in 1-2S ESC with 5A continuous and peak 6A current
Support BLHeliSuite programmable
Factory firmware: S_H_50_REV16_7.HEX
AIO Camera VTX

On the Beta75 Pro 2, it is the customized version lighter AIO VTX camera, only 2.9g.

Output power: 25mW
Smart Audio function is included for radio control
Antenna: Dipole ANT
Frequency: 5.8GHz 6 bands 48 channels, with Raceband: 5362~5945MHz
TV System: PAL
Field of view: 100-120 degrees with 1/4 lens

FAQ
1. Does this drone have current sensor?

This drone does NOT have a real current sensor. We use the virtual current meter in Betaflight. When properly calibrated, it can be accurate enough to be useful. Here is the pre-calibrated value out of the box.

set current_meter = VIRTUAL
set ibatv_scale = 90
set ibatv_offset = 29

2. Binding procedure of F4 2S AIO (SPI Frsky RX) is given in our support page.

3. Cli Dump for different versions of the 2S Whoop are provided in our support page.

4. The camera angle is 35 degree by default but a spare camera mount with 25 degree is also attached to the drone.

5. If you are using EU-LBT firmware radio controller, you might find that you can't bind successfully to this SPI Frsky receiver. Here are the solutions we provide for you.

6. If your Beta75 Pro 2 (SPI Frsky Receiver) shuts down and falls down randomly, please read this article in the support page.

PACKAGE
1 * Beta75 Pro 2 BNF 2S Whoop Quadcopter
2 * 300mAh 1S HV battery (Not for PNP version)
1 * Spare camera mount with 25 degree tilt

Ratings

 1  Rating

Share your experience with other customers: